"Kramer Electronics USA"
DIP-20 is an extended reach 4K@60Hz (4:2:0), HDBaseT transmitter and Step-in commander for VGA video, HDMI, and unbalanced stereo audio embedding and de-embedding.
The RC-2 is ideal for simple, convenient control of small spaces with serial-controlled devices such as projectors or displays.
Kramer VM-114H2C 2x1:4 HDMI/Twisted Pair Switcher & Distribution Amplifier - Video/audio extender - up to 328 ft - 1U
Kramer DigiTOOLS TP-580RXR Receiver - Video/audio/infrared/serial extender - RS-232, HDMI - up to 590 ft
The 105VB is a high-performance distribution amplifier for composite video signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs.
The 101L is a high-performance line amplifier for composite video signals. It provides controls to compensate for signal loss inherent in long cable runs.
Kramer TOOLS 4X1VB - Video switch - 4 x composite video - desktop
Kramer DigiTOOLS VM-22H - Distribution amplifier
The VM-16H is a distribution amplifier for HDMI signals. It reclocks and equalizes the signal and distributes it to 16 identical outputs.
The VP-400K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to four identical outputs.
The TP-126xl is an extended range twisted pair receiver for computer graphics video, unbalanced stereo audio and bidirectional RS-232 control command signals.
The PT-120xl is an extended range twisted pair receiver for computer graphics video signals. It converts a twisted pair signal from a WP-110 transmitter (or other compatible Kramer transmitter) to a computer graphics signal.
The KW-14T and KW-14R are a high-definition, wireless, HDMI transmitter/receiver pair for indoor use.
The VP-100 is a high-performance format converter for computer graphics video signals. It converts a computer graphics video signal on a 15-pin HD connector to either RGBS, RGsB, or RGBHV video signals on BNC connectors.
Kramer TOOLS TP-112HD Transmitter - Video extender - up to 328 ft - 1U
Kramer TOOLS TP-202 Transceiver - Video extender - up to 328 ft - 1U
The FC-331 is a high-performance format converter for video signals up to 3G HD-SDI (Level A). It converts the input video format (with embedded audio) to an HDMI output signal. The FC-331-MD is certified for medical applications.
The Kramer VS-161H is a high performance HDMI switcher for any large switching application, it can accept up to 16 HDMI inputs and then switch them over a single HDMI output.
The FC-32 is a high-performance format converter for DVI-D signals. The unit converts (without scaling) a DVI-D input to a computer graphics or component video output on a 15-pin HD connector.
The TP-121xl is a high-performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. It converts the input signals to a twisted pair signal and transmits them over CAT 5 cable to a compatible receiver.
PT-580T is a compact high-performance, long-reach HDBaseT transmitter for 4K60Hz (4:2:0) HDMI signal over twisted pair. PT-580T converts the input signal into the transmitted HDBaseT signal.
PT-1C is a 4K HDR EDID processor. It allows you to lock EDID signals and to support or not support HDCP, multi-channel audio or deep color signals that may or may not be compatible with the display.
The TP-114 is a high-performance distribution amplifier for computer graphics video or HDTV signals. It converts a computer graphics video or HDTV signal on a 15-pin HD connector to four identical twisted pair signals.
The VM-30AVB is a compact distribution amplifier for composite or SDI video and unbalanced stereo audio signals. It provides controls to compensate for signal losses inherent in long cable runs.
SID-X1N is a DGKat twisted pair transmitter and step-in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals.
