The FAP82T's 100 degree dispersion angle (in the 2kHz octave band) is perfect for higher ceiling applications where tighter pattern control is required. Tight pattern control (not exceeding 100 degrees) is important for high ceiling applications.
The AtlasIED PM8FA features the familiar response and dispersion of AtlasIED's model FA138 high performance 8" Strategy Series driver.
This coaxial loudspeaker features a 45Hz -19kHz (nominal) frequency response and a broad, uniform dispersion pattern of 105° (2kHz octave band). The GD87 combines a full-size 8" (203mm) dia., low-frequency reproducer, a 3" high-frequency reproducer.
EZ95-8 model enclosure is furnished with: four compound combination knockouts (1/2"-3/4", 13-19mm) spaced 90° apart.
Model SD72W is a dual cone, 25 watt 8" (205mm) loudspeaker with a 10oz. (260g) ceramic magnet. It includes a curvilinear, treated paper cone for lower harmonic distortion.
AtlasIED 8" Blind-Mount enclosure systems provide an easy and cost-effective alternative for secure loudspeaker installation in retrofit ceiling applications.
The CS95-8 enclosure is a perfect for use with AtlasIED model SD72W,SD72WV or high performance 8" 8-watt coaxial model GD87W loudspeaker/ transformer/baffle packages.
The 1RU tall EQM131 is easily connected to any system via rear panel balanced TRS and XLR jacks. Unbalanced RCA connections are also provided for use with -10dBV equipment.
The DLS4 was specially designed for use in low ceiling paging and background music applications such as airports where wide dispersion, high efficiency and ease of installation are required.
The AtlasIED FAP43T Strategy III 4.5" coaxial loudspeaker with next generation install technology. It is packed with new performance innovations at an affordable price point for every style of installation applications.
Model PM8CX-B includes the AtlasIED 8CXT60 compression driver coaxial loudspeaker which provides excellent efficiency exceeding 92dB 1W/1m.
The AA-YSUM features a 3' (1 m) cable with two Male RCA connectors, summed together via internal resistor network into a single three position Phoenix/Euro Style connector that will match input and output impedance of most audio equipment.
High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems.
The ASP-MG24 is 1RU, 2 input with 4 masking generators x 4 output DSP configurable by a very intuitive set-up GUI. Four inputs are tied to independent white/pink noise generators with adjustable ramp-up to allow gradual acclimation to masking levels.
The FAPSUB-1 consists of a highly efficient 8", 8 ohm subwoofer designed and built by AtlasIED to work optimality in the FAPSUB-1 enclosure system.
FAP40T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications. A unique (patent pending) tap selector switch design allows for easy system tuning.
The M1000 sound masking loudspeaker assembly is designed to accurately reproduce the required spectrum of masking signal into the plenum space. The innovative 734 cubic inch square enclosure ensures ample low frequency response.
Specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. Employs a ten-position, non-shorting rotary switch without stop. Attenuation rate is 1.5dB per step.