Ideal for all Canon EOS SLRs (except the 530 & RT models) the FC-E3 is an off-camera shoe cord that allows to shoot flawlessly in virtually any kind of light.
The Timer Remote Control Shutter is an advanced Nikon D90 Digital camera shutter release tool w/c can be used to release camera shutter, as well as to be programmed to run timed photography task, etc.
Acts as a wireless shutter release capable of instantly triggering the shutter without disturbing the camera. Recommended for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-ups and time exposure.
60C Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. One of the most important accessories for each lens you own.
Satechi ST2 Flash Trigger is ideal for mounting hot shoe flashes onto light stands. Standard shoe mount flash units can be mounted directly onto the integral hot shoe, which also provides the triggering power to the flash.
The MSA-3 is a universal mount designed to connect to a cameras accessory shoe connector. The mount allows the camera operator to attach any accessory with a 1/4x20 female thread connection.
LH-73B Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. One of the most important accessories for each lens you own.
LH-83J Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens.
Makes photographing in a vertical position much easier and provides a better handling of camera especially when using heavy lenses.
RM-E2 Infrared Remote control for Nikon D40, D40x, D50, N65, D60, D70, D70s, D80, D90 fully compatible with Nikon ML-L3.
It can trigger your camera shutter release remotely from about 5-10 meters (depend on the condition). 100% compatible with Pentax E remote control and F remote control.
Satechi LED-48A Macro Ring Lighting Unit is powered by 48 pieces powerful LED. Its specially designed ring shape is great for macro photography (close-up),can constantly emit light and provide permanent lighting for subjects.
Is designed for the Nikon SLR Digital Cameras that are equipped with a 10-pin accessory connector.
100% compatible with Pentax E remote control and F remote control. It can trigger your camera shutter release remotely from about 5-10merters(depend on the condition).
Professional DV Stereo microphone fits for home-used DV. It is delicate and light, 2 built-in cartridges which are vertical to each other. The MIC-1 enables a natural sound pick-up.
Wireless Timer Remote Control Shutter is an advanced Canon camera shutter release tool which can be used to release camera shutter, as well as to be programmed to run timed photography task, etc.
This universal shoe adapter is meant to fit into NIKON's Multi Accessory Port allowing any universal hot shoe mount accessories to be mounted to the NIKON 1 camera.
The MSA-2 universal shoe adapter is designed to fit into the Sony Active Interface Shoe (AIS) to allow lights, mics and other universal shoe mount accessories to be mounted onto the camcorder.
SCH-22 Camera Holder & Mount for DSLR and point-and-shoot cameras is the ideal solution for mobile photography. The camera mount is easy to use, durable, and small enough to be stored in almost anywhere.
This pre-trigger cable is designed to keep the camera constantly "awake", and has the same effect as holding the camera's trigger button pressed down half-way.
Wireless RF (radio frequency) remote control for your OLYMPUS E-1, E-10, E20 , E100, C5060 C7070, & C8080 Digital Cameras. Maximum operating range 100m.
The release button reacts fast and fine. (Tested on 1D Mark II, 1Ds, 20D, 10D,40D,60D). Two stage release button: Halfway pressing for autofocus, complete pressing takes the picture.
MA-G Camera Remote Control, a high quality case with an ultra soft cable, & even soft at low temperature. Designed to fit most hand size.
Two-step button switch with lock function. 100%compatible with Sigma CR-11