2U 14" Component Shelves have 4 mounting holes per U space and rounded corners.All Kendall Howard rack shelves are made in the USA and backed by our Limited Lifetime Warranty.
The DRW3U is a 3U fully enclosed black steel box with a pull out drawer. It is built with a high quality steel material and will not break or bend! Most studios can find at least 1 unit of available space in their racks and never enough storage space!
This 42U server rack provides a sleek, secure cabinet for storing standard 19” rack-mount devices such as Dell, HP, and IBM servers, along with telecommunication and A/V equipment.
This new wall rack is perfect for almost any wiring room. With its generous 20 inch deep chassis, this rack is perfect for CAT5, Fiber, Voice, or almost any cabling need. Snap-in rails make adjustments completely tool less!
Tripp Lite's SmartRack SRCAGENUTS is compatible with all square hole rack enclosure cabinets. Square hole hardware kit has 50 each M5 cage nuts and bolts to fasten equipment to square hole rackmount rails.
Tripp Lite Rack Enclosure Cabinet Heavy Duty Sliding Shelf 200lb Capacity - Rack shelf - black
The Kendall Howard 3U 16” Component Rack Shelf is one of our heavy duty component rack shelves. This shelf has a 150 pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPS's.
The Kendall Howard 1U 12” Vented Component Shelf is one of our heavy duty component rack shelves. This shelf has a 70 pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPS's.
Kendall Howard Stationary Keyboard Trays are a great way to mount keyboards to any 19" EIA Compliant open rack system. This strong and lightweight unit keeps the keyboard stable when in use, and the low profile design saves space.
The Product that started it all, the Kendall Howard Patented Rack Helper is a truly innovative product. This rack-mounted component makes installing heavy rackmount components a snap!
The Kendall Howard Cable Cove 2-Post Rack is not only a great way to mount your components but also an inexpensive wire management system as well.
The DRW2U is a 2U fully enclosed black steel box with a pull out drawer. It is built with a high quality steel material and will not break or bend! Most studios can find at least 1 unit of available space in their racks and never enough storage space!
All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finish.
Tripp Lite's SmartRack SRCABLEVRT6 helps eliminate cable stress by organizing the cables within the SmartRack Open Rack cabinet. The vertical cable manager (finger duct with cover) is 6-ft high, 6" wide and split into three 2-ft sections.
Mount your server and networking equipment to the wall, with side mounting for hassle-free access to rear cabling
Tripp Lite Open Frame Rack 6ft Vertical Cable Manager 3in Wide - Rack cable management duct with cover - black
Air distribution for power dense racks and low pressure areas.
Tripp Lite's PDUSIDEBRKT enables secure vertical installation of select 1U PDUs, Power Strips and Surge Suppressors in SmartRack enclosures.
StarTech.com M5 Rack Screws and M5 Nuts - M5 Cage Nuts and Screws - Rack screws and nuts
Tripp Lite Cat6/Cat5e 110 Punch Down Keystone Jack - Modular insert - RJ-45 - red
The N080-103 3-Port Single-Gang Universal Keystone Wallplate provides a clean and simple method for connecting audio/video, voice and Ethernet cable lines at the wall.
The N080-SMB1-WH Single-Gang Surface-Mount Junction Box is perfect for mounting a wallplate to complete multiple audio/video, voice and Ethernet in-wall connections using any type of keystone jack, including Cat5e/6/6a, USB, HDMI, DisplayPort and RCA.
A complete line of SmartRack accessories is available to customize your SmartRack to your application.
Ergotron StyleView T-Nut Kit - Mounting component (2 brackets, 8 screws) - aluminum - for Ergotron SV32 PHD Single Drawer