The PCI2S4851050 2-Port PCI Serial Adapter Card (RS422/RS485) with 161050 UART adds two DB9 RS422/RS485 serial ports, using a single PCI expansion slot.
Add 4 RS-232 serial ports to your standard or small form factor computer through a PCI Express expansion slot
This IDE to SATA Drive Adapter Kit offers a simple way to install Serial ATA hard drives using an available IDE port - a cost-effective solution for using newer SATA drives on a legacy computer or a computer with all SATA connections already in use.
StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader - Card reader - 3.5" (CF I, CF II, Microdrive) - IDE
CFast Card to SATA Adapter with 2.5" Housing - Supports SATA III (6 Gbps) - CFast Memory Card Converter - OS Independent
StarTech.com 2 Port 16in DB9 Serial Port Bracket to 10 Pin Header - Serial panel - DB-9 (M) to 10 pin IDC (F) - 1.3 ft - gray
SIIG DP CyberSerial 4S PCIe - Serial adapter - PCIe low profile - RS-232 x 4
Add an eSATA port and a USB 3.0 hub port to your Thunderbolt™-equipped MacBook® or laptop
SIIG JJ-E01211-S1 - Parallel adapter - PCIe low profile - parallel - black
Add 4 RS232 serial ports to any PC using a single PCI Express expansion slot
Add two Next Generation Form Factor (NGFF) M.2 SATA SSDs to your computer through PCI Express
Connect an mSATA drive to your development board, to increase its data storage capacity.
Connect an M.2 SATA drive to your development board, to increase data storage capacity.
StarTech.com M.2 to SATA SSD adapter - Storage controller (RAID) - M.2 - SATA 6Gb/s - 6 GBps - SATA 6Gb/s
Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard
Add two PCI and two PCI Express expansion card slots to your desktop computer
Add two SATA 6Gbps ports for high speed access to large internal storage solutions
Add two SATA 6Gbps eSATA ports for high speed access to large external storage solutions
Add external and internal 6 Gbps SATA 3.0 ports for high speed storage access
Add 2 external or internal SATA 6 Gbps ports to a computer, through a PCI Express slot
Connect a 2.5" or 3.5" SATA SSD/HDD to your USB-C enabled computer, with this USB 3.1 adapter cable.
Connect a CompactFlash card to a 40 or 44-pin IDE host.This IDE to Compact Flash SSD Adapter Card allows you to convert a single Compact Flash (CF type I/II) Card or MicroDrive into a bootable IDE Solid State Drive.
This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive.