General
Device Type
Router - with Cisco 7200VXR NPE-G2 Network Processing Engine
Enclosure Type
Rack-mountable - modular - 3U
Connectivity Technology
Wired
Data Link Protocol
Ethernet, Fast Ethernet, Gigabit Ethernet
Data Transfer Rate
1 Gbps
Network / Transport Protocol
TCP/IP, UDP/IP, PPPoA
Routing Protocol
OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, HSRP
Remote Management Protocol
SNMP, Telnet, HTTP
Authentication Method
Secure Shell (SSH), RADIUS, PAP, CHAP, TACACS
Features
Flow control, modular design, full duplex capability, layer 2 switching, auto-sensing per device, DHCP support, VPN support, BOOTP support, ARP support, MPLS support, VLAN support, manageable, IPv6 support
Compliant Standards
IEEE 802.1Q, NEBS level 3, FCC Class A certified, CSA, EN 60950, IEC 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC950, UL 1950, VCCI-II, CSA 22.2 No. 950, EN55022 Class B, AS/NZ 3548 Class A
Status Indicators
Port transmission speed, power, link OK
Expansion / Connectivity
Interfaces
3 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ Serial: 1 x auxiliary - RJ-45 ¦ Management: 1 x 10Base-T/100Base-TX - RJ-45 ¦ USB: 2 x 4 pin USB Type A ¦ 3 x SFP (mini-GBIC)
Expansion Slots
1 (total) / 0 (free) x CompactFlash ¦ 1 (total) / 0 (free) x memory ¦ 7 (total) / 6 (free) x expansion slot
Installed Modules Qty (Max)
1 (installed) / 7 (max)
Power
Power Device
Internal power supply - 280 Watt
Installed Qty
1 (installed) / 2 (max)
Voltage Required
AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided
Cisco IOS IP Base
Dimensions & Weight
Environmental Parameters
Min Operating Temperature
41 °F
Max Operating Temperature
104 °F
Humidity Range Operating
5 - 85%
