The HP MSM 802.11n Dual Radio Access Point Series works in unison with the HP controllers to deliver a high performance WLAN solution. Offering near gigabit client access and increased reliability they are ideal for voice and multi-media communications while providing full compatibility with legacy 802.11 clients and existing HP wireless controllers. Built-in Spectral Analysis and integrated Wireless IDS/IPS provides detection, classification and intelligent avoidance of non-802.11 interference and comprehensive threat protection.
FeaturesEnhanced Wi-Fi Performance- The HP MSM 802.11n Dual Radio Access Point Series is the first three spatial stream 802.11n access point product in the industry to deliver near gigabit client access for enhanced voice and rich media applications.
- Supports both centralized and distributed traffic forwarding offering enhanced application performance and WLAN scalability.
- Provides advanced QoS for voice and video communication supporting IEEE 802.1p traffic priority handling for Microsoft Lync and Spectralink Voice Priority (SVP).
- Extends network availability with self-healing, self-optimizing local mesh.
Improved Coverage and Reliability- The HP MSM 802.11n Dual Radio Access Point Series optimizes WLAN coverage and reliability with Wi-Fi Clear Connect automatic power adjustment, real-time identification of interference, and intelligent channel switching.
- Enhances the user experience with airtime fairness, providing equal RF transmission time for wireless clients in mixed client environments.
- Extends RF coverage with transmit beamforming and improve client performance by automatically redirecting 5 GHz-capable clients to the less-congested 5 GHz spectrum.
- Supports concurrent 5 GHz operation (MSM466 and MSM466-R) improving noise immunity, and channel availability in high density Wi-Fi environments.
Comprehensive Security- The HP MSM 802.11n Dual Radio Access Point Series provides comprehensive threat protection with integrated IDS offering granular threat detection and location tacking capabilities.
- Simplifies client authentication with support internal and external authentication, authorization and accounting servers, per user VLAN mapping and authentication.
- Locks out unauthorized wireless access by authenticating users prior to granting network access and secure data integrity of the wireless traffic with Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP).
Investment Protection- The HP MSM 802.11n Dual Radio Access Point Series provides indoor 802.11n Dual Radio indoor access points delivers industry leading Lifetime Warranty 2.0 and 3 year 24x7 phone support.
- Provides interoperability with all IEEE 802.11a/b/g/n client devices through Wi-Fi Alliance certifications.
SpecificationsPorts1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 RJ-45 serial console port
AP characteristicsRadios: Dual (a/n + a/b/g/n)
Radio operation modes: Client access, Local mesh, Packet capture
AP operation modes: Autonomous and controlled
Wi-Fi Alliance Certification: a/b/g/n Wi-Fi Certified
EnclosureOutdoor IP67 and NEMA 4X
Memory and processorDual core @ 800 MHz, 128 MB flash, 256 MB SDRAM
MountingIncludes hardware for pole and wall mount applications
EnvironmentOperating temperature: -40°F to 131°F (-40°C to 55°C); Below -20°C requires 802.3at PoE power to run embedded heater
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity: 5% to 95%, noncondensing
Electrical characteristicsDescription: IEEE 802.3af PoE compliant for Gigabit Ethernet for operation down to -20°C. For operation down to -40°C, 802.3at power is required.
Maximum power rating: 12.9 W
Antenna: External antennas only; six Type N connectors
Number of external antennas: 6
