The Cisco 2801 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.

The Cisco 2801 allows network managers to provide scalable analog and digital telephony without investing in a one-time solution, allowing enterprises greater control of their converged telephony needs. Using the voice and fax modules, the Cisco 2801 can be deployed for applications ranging from voice-over-IP (VoIP) and voice-over-Frame Relay (VoFR) transport to robust, centralized solutions using the Cisco Survivable Remote Site Telephony (SRST) solution or distributed call processing using Cisco Call Manager Express (CME).

Product Details:

Product Type:
– Integrated Services Router

Interfaces/Ports:
– 2 x 10/100Base-TX LAN

Interfaces/Ports Details:
– 2 x 10/100Base-TX LAN
– 1 x Console Management
– 1 x Auxiliary Management
– 1 x USB

Data Transfer Rate:
– 10Mbps Ethernet
– 100Mbps Fast Ethernet
– 115.2Kbps Console

Expansion Slots:
– (2 Total) AIM
– (4 Total) Expansion Slot
– (2 Total) PVDM

Modules:
– 1 x PVDM2-8 Packet Voice/Fax DSP Module

Management:
– Cisco Router and Security Device Manager (SDM)
– Simple Network Management Protocol (SNMP)
– Cisco CallManager Express (CME)

Protocols:
– TCP/IP
– SNMP
– SSH v1
– VoIP
– VoFR
– ATM
– VoATM
– H.323
– MGCP
– RTP

Operating System:
– Cisco 2801 IOS SP SERVICES

Security Features:
– Multiprotocol Label Switching (MPLS) VPN support
– Secure Shell (SSH)

Memory:
– 128MB DRAM Installed
– 384MB DRAM Maximum
– 64MB Flash Installed

Input Voltage:
– 100 V AC to 240 V AC Auto-ranging

Input Current:
– 2A @ 110V AC
– 1A @ 230V AC

Frequency:
– 50 Hz or 60 Hz

Temperature:
– 32 °F (0 °C) to 104 °F (40 °C) Operating

Humidity:
– 10% to 85% Non-condensing Operating

Form Factor:
– 1U 19" Rack-mountable
– Desktop

Package Contents:
– 2801 Router
– Cisco 2801 IOS SP SERVICES
– Cisco Call Manager Express Feat License For Up To 24 Users (FL-CCME-SMALL)
– Device manager for routers (ROUTER-SDM)
– 8-Channel Packet Voice/Fax DSP Module (PVDM2-8)
– 128 to 256MB SODIMM DRAM factory upgrade for the Cisco 2801 (MEM2801-128U256D)
– 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC)
– Blank WAN Interface Card Panel (WIC-BLANK-PANEL)
– Cisco 2801 AC power supply (PWR-2801-AC)
– Power Cord
– One blue RJ-45-to-DB-9 console cable
– One DB-9-to-DB-25 modem adapter
– 19-inch (48.26-cm) rack-mount brackets with bracket screws
– Cable management bracket with one mounting screw
– Rubber chassis feet for desktop application
– Cisco product registration card
– Cisco 2800 Series and Cisco 3800 Series Regulatory Compliance and Safety Information document
– Cisco Router and Security Device Manager (SDM) Quick Start Guide document
– Cisco 2800 Series Integrated Services Routers Quick Start Guide

Additional Information:
– Interface Card Slots:2 slots support HWIC, WIC, VIC, or VWIC type modules
– 1 slot supports WIC, VIC, or VWIC type modules
– 1 slot supports VIC or VWIC type modules

Operation Altitude (derate 1.5°C per 1000 ft):
– 25°C @ 3 km/10 kft
– 40°C @ sea level

System Requirements:
– Minimum Cisco IOS Software release: 12.3(8)T
Certifications & Standards:
– IEEE 802.3: 10BASE-T
– IEEE 802.3u: 100BASE-TX
– USB 1.1

Safety:
– UL 60950
– CAN/CSA C22.2 No. 60950
– IEC 60950
– EN 60950-1
– AS/NZS 60950

Immunity:
– EN300386
– EN55024/CISPR24
– EN50082-1
– EN61000-6-2

EMC:
– FCC Part 15
– ICES-003 Class A
– EN55022 Class A
– CISPR22 Class A
– AS/NZS 3548 Class A
– VCCI Class A
– EN 300386
– EN61000-3-3
– EN61000-3-2

TELCOM:
– Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's