TE100-S8 is an Auto-MDIX switch designed specifically to boost network performance by eliminating network congestions and unnecessary network traffics. Each port on the Switch provides dedicated bandwidth and can negotiate between 10/100Mbps network speeds and half/full duplex modes. Plug-N-Play provides cost-effective and high performance solutions.
Product Features:
– 8 10/100Mbps Auto-Negotiation, Auto-MDIX Fast Ethernet RJ-45 ports
– Compliant with IEEE 802.3 / IEEE 802.3u standards
– IEEE 802.3x Flow Control support
– Provide 1K MAC address entries
– Compliant with Windows, Linux, and Mac Operating Systems.
– Store-and-Forward Switching method
– Non-blocking Architecture
– Diagnostic LEDs
– Plug & Play
Product Specifications:
Standards
– IEEE 802.3 10Base-T
– IEEE 802.3u 100Base-TX
– IEEE 802.3x Flow Control
Network Media
– Ethernet: UTP/STP Cat. 3,4,5, EIA/TIA-568 100-ohm
– Fast Ethernet: UTP/STP Cat. 5. 5E, EIA/TIA-568 100-ohm
Data Rate
– Ethernet: 10Mbps/20Mbps (Half/Full-Duplex) Fast
– Ethernet: 100Mbps/200Mbps (Half/Full-Duplex)
Switch Fabric
– 1.8Gbps Forwarding Capacity
Topology
– Star
Interface
– 8 10/100Mbps Auto-MDIX RJ-45 Ports
Filtering Table
– 1K Entries per device
Power Consumption
– 2.8 watts (max)
Diagnostic LED
– Power, Link/ACT, 100Mbps
Power Adapter
– Switching Power 5V DC 800mAor
– Linear Power 7.5V DC 1A
Temperature
– Operating: 0° ~ 50° C (32° ~ 122° F)
Humidity
– 10%~90% (Non-Condensing)
Certification
– CE, FCC
