8000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output.
Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input and output connections. Detachable hardwire input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment.
Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces.
Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons offers detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level.
LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme.
Key Buying Points:
– 8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input / High voltage output)
– Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
– Installs in only 6 rack spaces (3U power module / 3U battery pack) with a maximum installed depth of 32.5 inches
– Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of optional BP240V10RT3U or BP240V32 external battery packs
– Standard 3-wire 208V hardwire input and output connections
– Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
– Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
– Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
– Detailed LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more
– Network-grade AC surge and noise suppression
– Zero transfer time between AC and battery operation
– Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot
– Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
– Emergency Power Off (EPO) interface
– Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status
– Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
– 4-post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories available
– Field replaceable, hot swappable power module and external battery packs
– Attractive all-black color scheme
– Extended warranty and service contracts available
Special Features:
– EPO port: Includes dedicated EPO (emergency power off) interface and cabling
– Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
– Appearance: Attractive all-black color scheme
Typical Applications:
– Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
