ActionTec USB Ethernet DSL Modem with Routing Capabilities GEU003AD3A-01

The Actiontec USB/Ethernet DSL Modem with Routing Capabilities is really two devices rolled into one. Its a full rate ADSL modem thats upgradeable to the faster ADSL 2/2+protocol. And Its a router, capable of networking up to two computers, via wired ports, with a minimum amount of hassle. So, get rid of the clutter of components on your desk and replace them all with the Actiontec USB/Ethernet DSL Modem with Routing Capabilities.

The Modems engine is ready for the future. It can be upgraded to ADSL2 the DSL standard that enhances modem performance by tripling the available bandwidth (from 8Mbps to 24Mbps). Say goodbye to stuttering, pixilated video streams and the endless wait while downloading large files. Theres more room for voice data, as well, so you can experience free or low-cost Internet telephone conversations. And since the upgrade to ADSL2 can be done remotely, you wont need a Ph.D to get yourself up to speed.

The DSL Modem includes TIs TNETD7300 Broadband Communication Processor and Peripherals. The TNETD7300 is the industrys most densely integrated system-on-a-chip ever offered to the ADSL CPE market by Texas Instruments. The TNETD7300 is considered an ADSL bridge/router solution, integrating a broadband communications processor and peripherals, ADSL physical layer, ADSL line driver, USB physical layer, and Ethernet physical layer.

Features:

– Supports UPnP Plug-and-Play installation for systems with Windows Operating Systems (98, 98SE, Me, 2000 and XP)
– Support One ADSL WAN port (RJ11)
– Compliant with full-rate ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) and G.992.2(G.lite) standard
– Auto-handshake for different ADSL flavors
– Compliant with USB 1.1 device specification
– Supports 12Mbps USB data rate (Full Speed)
– Bridged Ethernet over ATM, PPP over ATM, PPP over Ethernet
– Precise ATM traffic shaping
– IP packet routing and transparent bridge
– Routing protocol supports RIP-1, RIP-2, Static Routing
– Build-in NAT, DHCP server
– DNS relay support
– PAP/CHAP authentication, administrative passwords through Telnet
– Compliant with IEEE 802.3 Ethernet standard
– Supports One 10/100BASE-T Ethernet LAN port
– Flow control support for Fast Ethernet
– Web-based configuration setup
– Default configuration backup restore
– FTP firmware upgradeable
– Support web download

General
Device Type	Router
Form Factor	External
Networking
Connectivity Technology	Wired
Framing Format	ANSI T1.413
Data Link Protocol	Ethernet, Fast Ethernet
Network / Transport Protocol	TCP/IP, PPTP, UDP/IP, AAL2, IPSec, PPPoE, PPPoA, AAL5
Routing Protocol	RIP-1, RIP-2, static IP routing
Remote Management Protocol	Telnet, HTTP
Features	Flow control, full duplex capability, firewall protection, DHCP support, NAT support, PAT support, auto-negotiation, ARP support, Stateful Packet Inspection (SPI), DoS attack prevention
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.3x
Communications
Type	DSL modem
Digital Signaling Protocol	ADSL
Protocols & Specifications	ITU G.992.1 (G.DMT), ITU G.992.2 (G.Lite), ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.4 (G.lite.bis), ITU G.992.5
Expansion / Connectivity
Interfaces	1 x USB ¦ 1 x modem - ADSL - RJ-11 ¦ 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
Cables (Details)	1 x USB cable ¦ 1 x network cable ¦ 1 x modem cable
Authentication Method	PAP, CHAP
Compliant Standards	UPnP
Software / System Requirements
Software Included	Drivers & Utilities
OS Required	Microsoft Windows 98, UNIX, Linux, FreeBSD, Apple MacOS 9.0 or later, Microsoft Windows 98SE/2000/ME/XP
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	104 °F
Humidity Range Operating	8 - 95%