Product Highlights:
– Send video over up to 500 feet of ordinary CAT5 cable.
– Eliminate the need for bulky VGA cables.
– Send to a single receiver or up to four receivers.
– Buffer and boost signals for a clear video image.
Features
Say goodbye to bulky, expensive, and difficult-to-terminate VGA cable. Use BLACK BOX Mini CAT5 Extenders to set up video monitors up to 500 feet (152.4 m) from your PC or video source by using ordinary CAT5 UTP cable.
These extenders enable you to place video displays such as monitors or LCD screens where you need them to display information such as schedules, menus, or advertising.
They’re easy to install! Just plug a standard CAT5 cable, up to 500 feet (152.4 m) long, between the two units. A pair of extenders requires only a single power supply, which can be plugged in at either end of the link. The extender/splitter requires a power supply at the transmitter end only to power a link to all connected receivers.
Mini CAT5 Extender Kits:
– Low-cost, single-channel extenders for sending video signal over CAT5 UTP.
– The VGA kit formats a PC’s VGA signal for CAT5 transmission and converts the signal back to VGA for connecting a monitor or other display device at the receiver end.
– The Component kit enables extensions between DVD players or other Component (RGB or Y-Pb-Pr, or Y-Cb-Cr) devices and compatible displays, such as HDTV monitors.
Mini CAT5 Splitter/Extenders:
– Send VGA video signals over CAT5 UTP to two or four monitors.
– The 2-channel transmitter sends video to two remote displays; the 4-channel transmitter sends video up to four remote displays.
– Order a separate receiver for each remote display.
– A second VGA connection on the transmitter enables you to connect a local monitor.
Mini CAT5 VGA Extender with Wallplate Transmitter
– Sends video up to 500 feet (152.4 m) over ordinary CAT5 cable.
– Eliminate bulky VGA cables.
– Single-gang wallplate mounts in any standard junction box.
– Differental signaling eliminates ground loops and noise.
– Features an RJ-45 connector on the rear and an HD15 connector on the front.
– Transmitter includes a power supply that connects with screw terminals.
Specifications:
– Distance (Maximum) — 500 ft.(152.4 m)
– Resolution (Maximum) — 1600 x 1200 at 300 ft. (91.4 m) or 1280 x 1024 at 500 ft. (152.4 m)
– CE Approval — Yes
– Connectors — AC504A, AC504A-CP: (1) HD15 F on transmitter and receiver unit for video out/in; (1) shielded RJ-45;
– AC600A: (2) HD15 F, (2) shielded RJ-45;
– AC601A: (2) HD15 F, (4) shielded RJ-45;
– AC504A-WP: (1) HD15 F for video out/in, (1) RJ-45;
– AC602A: (1) HD15 F for video out/in; (1) shielded RJ-45;
– Power — 100–240 VAC, 50–60 Hz, autosensing;
– AC504A-WP: External: output voltage: 9 DC center-positive; Sends power over UTP
– Size — AC504A, AC504A-CP, AC602A: Each unit: 0.8"H x 1.7"W x 4.5"D (2 x 4.3 x 11.4 cm);
– AC600A: 1.2"H x 4.9"W x 2.6"D (3 x 12.4 x 6.6 cm);
– AC601A: 1.2"H x 8.5"W x 3"D (3 x 21.6 x 7.6 cm);
– AC504A-WP: Single-gang wallplate
