Specifications - Standards: IEEE 802.3, 802.3u
- Ports: Sixteen 10/100 RJ-45 ports, including 2 Internet ports, 1 DMZ port, 8 LAN ports, and 5 configurable Internet/LAN ports
- Buttons: Reset
- Cabling type: Category 5 Ethernet
- LEDs: Diag, System, LAN/Act 1 through 13, Internet/Act 1 through 7, DMZ
- Universal Plug and Play (UPnP) able certified: Certified
- Operating system: Linux
- Network Address Translation (NAT) throughput: 200 Mbps
- IPsec throughput: 97 Mbps
- Firewall: SPI Firewall
- Denial-of-service (DoS) prevention: Blocks various DoS attacks
- Access rules: Up to 50 entries
- Port forwarding: Up to 30 entries
- Port triggering: Up to 30 entries
- URL filtering: Static list by domain or keywords (included), dynamic filtering through Trend Micro ProtectLink Gateway Security Service (optional)
- Multi-WANs: Supports up to 7 WAN ports with load balancing, allowing certain WAN ports to be dedicated to specified IP ranges and services
- WAN type: DHCP, static IP, Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Telstra BigPond, Dynamic DNS
- Protocol binding: Protocols can be bound to a particular WAN port
- DHCP: DHCP server, DHCP client
- DNS: DNS proxy, Dynamic DNS (DynDNS, 3322, PeanutHull)
- NAT: Many-to-one, one-to-one
- DMZ: DMZ port, DMZ host
- Routing: Static and Routing Information Protocol (RIP) versions 1 and 2
- Port-based QoS: Configurable per LAN port
- Service-based QoS: Supports rate control or priority
- Rate control: Upstream/downstream bandwidth can be configured per service
- Priority: Each service can be mapped to one of the 3 priority levels
- IPsec: 100 IPsec tunnels for branch office connectivity
- QuickVPN: 50 QuickVPN users for remote client access
- PPTP: Built-in PPTP server supporting 10 PPTP clients
- Encryption: DES, 3DES, Advanced Encryption Standard (AES)-128, AES-192, AES-256
- Authentication: MD5, SHA1
- Internet Key Exchange (IKE): Supports IKE
- IPsec NAT Traversal (NAT-T): Supported for gateway-to-gateway and client-to-gateway tunnels
- Dead peer detection (DPD): Support for DPD
- VPN pass-through: PPTP, Layer 2 Tunnelling Protocol (L2TP), IPsec
- Web based: HTTPS
- SNMP: Supports SNMP versions 1 and 2c
- Log/monitoring: Syslog, email alert, VPN tunnels status monitor
|