Turn a 6 Gbps HDD or SSD into secure external storage with touchpad password entry
Add four 3.5" SATA III hard drives to your computer externally through USB 3.0 with UASP or eSATA
Turn a 3.5" SATA Hard Drive into a UASP-supported USB 3.0 External Hard Drive
StarTech.com 3.5in USB 3.0 External SATA III Hard Enclosure with UASP - Storage enclosure - 3.5" - SATA 6Gb/s - 600 MBps - USB 3.0 - black
Easy, trayless removal and insertion of dual 2.5in SATA hard drives from single 3.5in bay
This Black Aluminum Serial ATA Drive Casing instantly makes your 3.5” SATA drives portable and interchangeable; making data archiving, backups, and large file transfers a breeze.
Dock your 2.5in or 3.5in SATA 6 Gbps SSDs/HDDs over eSATA or USB 3.0 with UASP
Enable fast, swappable access to your 2.5in or 3.5in SATA hard drives, through USB 3.0
C2G Cat5e Non-Booted Unshielded (UTP) Network Patch Cable - Patch cable - RJ-45 (M) to RJ-45 (M) - 200 ft - CAT 5e - stranded - gray
Easily connect and hot swap a SSD or HDD from a 3.5in bay
Turn a 2.5” SATA III HDD / SSD into an external hard drive that can connect to your computer through either eSATAp at 6 Gbps, or USB 3.0 with UASP at 5 Gbps
Use your 2.5in or 3.5in IDE hard drives in a SATA HDD Docking Station
Turn a 2.5” SATA III or IDE HDD / SSD into an external hard drive that connects to your computer through USB 3.0 with UASP
Convert an m.2 NGFF solid state drive into a standard 2.5in form factor 6Gbps SSD
Turn a 2.5” SATA HDD/SSD into a 3.5” SATA Drive
Replace or upgrade to a 300W power supply for a standard ATX computer
One high performance storage solution to support two SSD or HDD drives
Gear up for the field with portable hard drive protection
This removable enclosure is a cost-effective way to quickly insert or remove SATA hard drives from any PC with an available 5.25-inch drive bay without opening the computer case.
These high-quality M6 x 12mm screws and cage nuts make it easy to mount equipment in your server rack or cabinet
StarTech.com PC Mounting Computer Screws M3 x 1/4in Long Standoff - Screw kit - 0.2 in (pack of 50)
This innovative hot swap bay requires only three 5.25” bays, maximizing space-efficiency within the host computer.
Make a right-angled connection to your SATA drive, for installation in tight spaces
StarTech.com LP4 to SATA Power Cable Adapter with Floppy Power - Power adapter - SATA power (M) to 4 pin internal power, 4 pin mini-power connector (F) - black - for P/N: SATSASBAY425, ATX2POWER430, ATX2POWER530, DRW110SATBK